Entries by 우찬

손가락 관절뼈대 테스트 버전

Below is a finger of a tiny hand armature I made last year for one studio in the UK. I used H-shaped parts for this armature. This H-shaped part is the thinnest one I’ve ever made. Its edges are less than 1 mm thin. 지난 포스트에서 손톱 위에 놓인 H 모양의 작은 부품을 보여드린 적이 […]

모치나가 타다히토 감독의 전시 관람

  This summer I’ve visited the exhibition of Tadahito Mochinaga, one of the early pioneers of Japanese stop-motion animation. It was showing at the National Film Center in Tokyo. 작년 퀘이 형제 전시에서는 퀘이 형제가 직접 일본을 방문해 오프닝에 참석했습니다. 작가들이 직접 방문했다는 소식에 많은 사람들이 하야마로 몰렸죠. 퀘이 형제와의 친분으로 여러 일본 사람들을 만나 […]

퀘이형제 출연 광고 속의 작업한 뼈대

위 영상은 한국에도 잘 알려진 벨기에 맥주 브랜드 레페의 광고 캠페인입니다. 시간을 다루는 스톱모션 애니메이션 작업에 슬로우 타임이라는 레페 광고의 컨셉이 너무나도 잘 어울리는 듯합니다. 퀘이 형제가 민들레 홀씨를 핀셋으로 하나씩 떼어내면서 애니메이팅하는 장면을 보고 있자면, 대단하다는 생각밖에 들지가 않네요. 퀘이 형제의 나레이션을 통해 그들이 가지고 있는 애니메이션과 시간에 대한 개념을 엿볼 수 있습니다. 짧은 […]

최근 작업 Recent Works (April 2017)

This is the chest part of the armature I made for a stop-motion animation TV series. It’s almost the size of a thumb nail. It seems a bit ridiculous when I think of how little such parts are, compared to the size of the enormous machines I use. 작년 겨울부터 지금까지 TV 시리즈 제작 프로젝트에 […]

Winkle Bear’s new episode

Tuba Entertainment has released a new episode of Winkle Bear series. Its stop-motion animation work was produced by Comma Studio in South Korea. Comma is currently working on this series, planning to complete three more episodes this year.

Hand Armature for Kia motors AD

작년에 기아자동차 광고 시리즈에 사용할 실제 손 크기의 뼈대를 제작했습니다. 이 광고 시리즈에서는 손 캐릭터가 등장해 사람처럼 움직이며 춤을 춥니다. 손가락은 마치 팔 다리가 된 것처럼 움직입니다. 작년에는 퀘이 형제의 작품에 들어갈 아주 작은 손 뼈대도 제작했는데, 그 때에는 힌지 관절을 사용했습니다. 이 실물 크기의 손 뼈대에는 인간과 같은 움직임을 구현하기 위해 볼앤소켓 관절이 들어갑니다. […]

Wingcle Bear

‘Wingcle Bear’ is an animal character created by Tuba Entertainment in South Korea, which is well-known for a computer-animated series <Larva>. I have been working on a stop-motion animation series of it since this summer. Here’s the first episode. (Stop-motion series are producing in Comma Studio)

PHANTŒM MUSÆUMS BY The QUAY BROTHERS

작년에 퀘이 형제의 첫 일본 전시 오프닝에 초청을 받아 도쿄 근교에 위치한 하야마 현대미술관을 방문했습니다. 당시의 오프닝 참석 후기는 아래 포스트에서 읽어보실 수 있습니다. 올해에도 도쿄에서 열리는 동일한 전시를 방문할 기회가 있어 다녀왔습니다. 이 전시는 일본을 약 일 년 정도 더 순회할 예정이라고 합니다. The Museum of Modern Art, Hayama in Japan is hosting an […]

Customized brass nuts

이번 사진은 워커 또는 리깅에 부착하는 비스듬한 각도의 너트입니다. 미국과 영국 쪽 스튜디오에서 주로 사용됩니다. 이 너트는 영미권에서 만드는 것과 같은 방식이지만 사용자의 편의를 위해 제가 다시 디자인한 버전입니다. This is a picture of customized brass nuts, which are used as supplementary parts for rigging. I usually make my armatures in various materials including alloys […]

Mermaid armature

2015년 초에 Adrienne Dowling이라는 영국 NFTS 학생의 졸업작품 “Fishwitch”에 들어갈 인어 금속관절뼈대를 만들었습니다. 인어 뼈대에서 가장 중요했던 건 물 속에서뿐만 아니라 육지에서도 자연스럽게 움직여야 한다는 점이었습니다. In early 2015 I made a mermaid armature for an NFTS (National Film and Television School, UK) graduation film titled Fishwitch directed by Adrienne Dowling. Adrienne told me that […]